Coverage is not transferable.
Warranty service is tied to the original order and original purchaser. Second-hand purchases are not covered.
Pick your year, make and model to see compatible products.
Switch between vehicles, remove them, or add a new one.
RGB Rock Light Kit
X Series 7-Inch Pod Light
CYBEREYE Headlight
LED Whip Light
D1 D1S D1R LED Headlight Bulbs
D2S LED Headlight Bulbs
D3R D3S LED Headlight Bulbs
9006 LED Yellow Fog Light Bulbs
H11 LED Yellow Fog Light Bulbs
HALO Pro 8" Black Casing
HALO Pro 20" Black Casing
270° Side Awning - Black
ABS Hard-Shell Side Awning
Mount Brackets



















A truck underglow kit that earned its place under an off-road rig — and that actually fits it. We mapped these underbodies and built a kit for each one, so you're not measuring your own frame rails or hoping a "universal" four-piece set reaches.
A dual-row 5050 array firing at two angles lays down one seamless carpet of light — no hot spots, no dark gaps, no visible diodes. Every section is wrapped in 2.5mm of extruded aluminum and filled with solid clear resin, so rocks, vibration, mud and water crossings don't end the show.
Sections chain together with sealed connectors, and the aluminum channel is rigid enough to screw straight to the frame — screws and straps both included, so you decide whether to drill. 256 dynamic modes, app and remote control, a built-in mic for real music sync, and a 7-core harness that wires into your brake, turn, reverse and accessory circuits.
Kit configurations
Section specs (per section)
Control & power
Pick the kit that matches your platform — each one ships with the section count and lengths that layout needs. Sections mount to the front, rear and rocker frame rails.
Because the housing is a rigid 2.5mm aluminum channel, you can drive a self-tapping screw straight through it for a permanent mount — or strap it on with the included heavy-duty ties if you'd rather not put a hole in your rig. Both are in the box.
Plan roughly 30cm (12") between sections on each side for the chain leads to route cleanly.
Buying individual sections? The same rules apply — roughly 30cm between sections, and every section SKU is a matched left/right pair.
Complete kits — Off-Road / Mid-Size / Full-Size
Individual sections — 11" / 17" / 27"
6A Control Box
2m Extension Lead
Free US shipping, ships from the USA.
30-day returns. Not the right fit? Send it back within 30 days — full details on our Returns & Exchanges page.
Delivery times, carriers and tracking are covered on our Shipping Policy page.
2-year warranty on all MagicCarpet components.

This page covers how we ship — processing, addresses, warehouses and customs. For what shipping costs and how long it takes to your country, see the rate tables.
View Shipping Rates & Delivery Times
Standard shipping is free, with no minimum order, to:
Alaska, Hawaii and US territories are served by different carrier networks and are charged by weight at checkout. All other countries are charged by weight as well. Expedited and express services are always paid, including in the free-shipping regions above.
Full rates and delivery estimates for every region are on the Shipping Fee page.
Orders placed before 2:00 PM PT on a business day are typically packed and handed to the carrier within 1-2 business days. Orders placed on weekends or US public holidays begin processing the next business day.
Processing time is already included in the delivery estimates on the Shipping Fee page. Those ranges run from the day you place your order, not the day it ships — you don't need to add anything to them.
Occasionally an order needs an extra 1–2 business days before it can go out — for example when stock has to move between warehouses, when we miss a carrier's pickup cut-off, or during peak season. If your order hasn't shipped yet and you'd like an update, email us and we'll check on it.
You'll receive a tracking number by email the moment your order ships.
Please enter your address in English, and double-check the postal code and phone number before you place the order. Our carriers require a valid phone number for international and expedited shipments.
We cannot deliver to: PO boxes, or APO / FPO / DPO military addresses. Orders to these addresses will be held and refunded.
If an address is incomplete and we can't reach you, your order is held until we hear back. Orders returned to us as undeliverable can be refunded less the outbound shipping cost, or reshipped once you provide a corrected address.
Need to change your address? Email us as soon as you can. We can update it any time before your order ships — but most orders ship within 1-2 business days, so that window is short. Once a tracking number has been issued, the address is locked with the carrier and we can no longer change it.
If something in your order is out of stock, we'll contact you before shipping. You can choose to receive the in-stock items now and the rest when it arrives, swap the item, or cancel that line for a refund — whichever you prefer.
Some products are offered as pre-orders before stock lands. For these, the processing and delivery times above do not apply.
Once a pre-order ships it's treated like any other order, and our standard Returns & Exchanges applies.
Custom and made-to-order products are not covered by the shipping and delivery times on this page. Production time is confirmed with you per order before we begin. If you're not sure whether an item is made to order, email us before you buy.
We ship from regional warehouses rather than one central location. When an item is already in stock near you it ships from there; anything else ships from overseas.
Your order is routed automatically based on where the items are held and where they're going. We're not able to ship from a warehouse of your choosing.
Prices shown at checkout do not include duties, import taxes or customs fees unless stated otherwise for your country. Any charges levied by your local customs authority are the responsibility of the recipient and are collected by the carrier on delivery.
Duty and tax rules vary by country, by product and by order value, and they change. Novsight does not collect customs fees — we have no control over what your customs authority charges.
If you're unsure what applies to you, check with your local customs office before ordering.
You'll receive a tracking number by email as soon as your order ships. International tracking can take 2–3 business days to begin updating after handover to the carrier — this is normal and does not mean the parcel is lost.
Email service@novsight.com and we'll get back to you within one business day.
Check your warranty period, eligibility, coverage and required information before submitting a request. Warranty coverage starts on the original purchase date and applies to the original purchaser.
Eligible products must be registered within 30 calendar days after the original purchase date. Any approved extension is calculated from that original purchase date. Products in the fixed one-year group do not receive a registration extension.
Start here
Choose the situation that best matches your question before opening a warranty request.
01 · Warranty periods
All periods are calculated from the original purchase date. A valid registration must be completed within 30 calendar days after purchase for an eligible extension.
| Product group | Included products | Standard limited warranty | With valid registration |
|---|---|---|---|
| Group 1 |
|
2 years | 3 additional years 5 years maximum |
| Group 2 |
|
1 year | 1 additional year 2 years maximum |
| Group 3 |
|
1 year |
No extension 1 year fixed |
02 · Eligibility and purchase channel
Warranty service is tied to the original order and original purchaser. Second-hand purchases are not covered.
The NOVSIGHT Warranty Request form is intended for products purchased directly from novsight.com.
Amazon, Walmart, eBay, dealer and retail orders should be handled through the original purchase channel.
The recipient must provide verifiable original order information or ask the original purchaser to assist with the claim.
If the original seller can no longer be contacted or you have another exceptional situation, use the Contact Us form. Contacting NOVSIGHT does not by itself confirm that the claim has been accepted.
Products used in a commercial or industrial environment receive only the applicable standard limited warranty and are not eligible for a registration extension.
03 · Product registration
04 · Coverage and available solutions
NOVSIGHT covers verified defects in materials or workmanship that arise during the applicable warranty period when the product is installed, used and maintained as intended.
NOVSIGHT may approve repair, replacement, exchange or refund.
NOVSIGHT may approve replacement, exchange or refund after confirming an inherent product issue.
05 · Exclusions and limits
These items do not receive long-term product warranty coverage or a registration extension. A clear defect on arrival, wrong item or transit damage may still be handled under the applicable delivery or Returns & Exchanges rules.
06 · Request process
Direct novsight.com orders use Warranty Request. Other orders normally return to the original seller.
Warranty service cannot be completed without information that verifies the original purchase.
Provide the model, SKU or a clear photo of the product label. For vehicle-light claims, NOVSIGHT may also request the after-sales barcode.
Explain what happened and when it began, and attach clear photos or video showing the problem.
NOVSIGHT may request installation information, tests, additional evidence or return of the product before deciding the claim.
After the required information is complete, NOVSIGHT generally aims to propose the next solution within 2–3 business days. This is not a promise that every claim will be fully completed within that time.
07 · Special cases
Final Sale products do not receive the ordinary product warranty shown above. NOVSIGHT warrants only that the product can function normally when delivered. If an inherent product issue prevents normal use, contact NOVSIGHT within 30 calendar days after confirmed delivery. After review, NOVSIGHT may approve replacement or refund without requiring return of the original product. NOVSIGHT makes the final decision.
For an approved Final Sale replacement, NOVSIGHT covers the replacement product and replacement shipping; the customer is responsible for replacement import duties. An approved refund includes the product’s actual paid amount and the delivery shipping actually paid for that product. Activated shipping-protection fees and original import duties are not refunded.
Historical RTT01, RTT02 and RTT03 orders follow the separate Legacy Rooftop Tent Policy & Support. RTT01 and RTT02 have a one-year standard warranty with no registration extension. RTT03 has a one-year standard warranty and may receive one additional year when valid registration was completed within 30 calendar days after purchase.
For an approved oversized-product quality issue, NOVSIGHT may send replacement parts or approve a specific local repair solution. The customer must receive written approval before arranging a repair or incurring a cost. If return of the oversized product is required and the quality issue is confirmed, NOVSIGHT covers the approved return shipping.
08 · Policy relationship
09 · Support
Use Warranty Request for troubleshooting, repair, replacement or another warranty solution. Use Product Registration only to register an eligible product within 30 calendar days after purchase.
MagicCarpet Series
Most underglow is a light show that dies on the first rock. This one throws a seamless carpet of light under your rig — and then survives the trail you drove it on.
Why It Looks Different
Everyone else runs pods, or a single row of 5050s firing straight down. You get a bright stripe and a dark gap — you see the diodes, not the light. We run two rows at two different beam angles: one narrow row drives brightness straight down, one wide row washes the whole underbody. Twice the output, edge to edge, and not a single visible dot.
The tighter angle puts peak intensity right under the rocker, where a single-row strip has to spend all its output.
The second row fires wide and washes past the body line, filling the dark band a single angle always leaves.
Double the diodes in one channel and two beams that overlap. Even coverage, no hot spots, and no dotted line of visible diodes.
Why It Survives
The reason cheap underglow dies isn't the LEDs — it's everything around them. Typical kits use a 1mm shell with a thin skin of potting on top. One rock and you're done. We extrude the channel at 2.5mm, then fill it all the way through with clear resin. Scrape a layer off and there's still a layer under it.
Extruded aluminum wall thickness — to scale. Thinnest point on our profile is still 1.5mm.
2.5mm extruded aluminum wraps the whole strip. It also acts as the heatsink — cooler diodes last longer.
Clear resin fills the channel end to end. No air pocket for water to sit in, nothing loose to rattle apart on washboard.
Fully waterproof to IP68 — water, dust, mud, sand and winter road salt. Rated for submersion, not just splashes.
The Part Everyone Else Gets Wrong
Here's the real reason people don't buy underglow: they have no idea whether it'll fit. So the whole category ships one "universal" four-piece set and leaves you to figure it out — measuring frame rails in your driveway, ending up short on one side or with a strip you can't use. We went the other way. We mapped these underbodies and built a kit for each one. Pick your platform; the math is already done.
Wrangler JL · JLU · Gladiator JT
+ mid-size trucks with uneven underbodies
Tacoma · Ranger · Colorado · Bronco
(flatter underbodies)
F-150 · Silverado · RAM · Tundra
Sections ship as matched left/right pairs, so both sides of your rig are always covered. Every kit ships with the 6A control box, end caps, remote — and both self-tapping screws and heavy-duty straps, so you mount it your way. A typical "universal" set gives you one fixed length and hopes it reaches.
Not Four Strips in a Box
Each module carries a sealed 15cm pigtail at both ends — male one side, female the other. Modules chain down the rail and a sealed end cap closes the run. Unusual layout? 2-meter extension leads are available separately to jump a long gap. One 6A control box feeds both sides through its own 3-meter leads. No cutting, no splicing, no electrical tape holding your wiring together.
Part 01
11" / 17" / 27". Sealed 15cm leads at both ends, male and female — they daisy-chain in either direction.
Part 02 · optional
6.5ft jumpers for unusual layouts that need to span a long gap. Sold separately — kits don't need them.
Part 03
Seal the last connector on each run. No open contacts under a truck that lives in mud and salt.
Part 04 · The Brain
Every setup needs exactly one. Two 3-meter leads out to the left and right runs, one 2-meter power lead in — a single box runs the whole underbody, one section or ten.
Run the Show
Chase, flow, fade, breathe — 256 dynamic modes and 10 presets, driven by app control from your phone or by the RF remote. Switch to Music Mode and the carpet moves with the sound. Most kits can only listen through your phone's mic; our control box has its own mic built in, so it picks up the music where the party actually is.
Wired In, Not Stuck On
The 7-core harness taps your brake, turn, reverse and accessory circuits. Hit the brakes and the carpet answers. Signal a turn and that side runs a marker. Back up and the ground behind you lights. Don't want one of those four? Leave that wire unconnected — everything else still works.
Driver side runs a directional marker in sync with your signal.
The whole carpet flashes when you're on the pedal — hard to miss from behind.
Passenger side does the same — you're readable in a dust cloud.
Lights the ground behind the rig while you back into a spot or onto a trailer.
The kit's power gate. Wire it to an accessory circuit — the one that wakes at the first click of the key, same as your radio — and the lights work whenever the key is at ACC or ON, engine running or not. Pull the key and everything goes fully dead, so nothing drains your battery overnight. Want them available at all times instead? Wire it to constant 12V and accept the standby draw.
Green (+) Blue (−)
2m 0.7mm² lead from the control box.
Beyond the Show
Show cars park. Rigs work. Once you've got nine feet of light pointed at the ground, it stops being decoration.
Doubles as rock lights for your rig — watch your tires, your suspension travel and the rocks you're about to place them on: the ground your headlights can't reach.
Soft, wide, glare-free ground light for cooking, gear sorting and hanging out — without blinding everyone like a light bar does. Runs with the key at ACC, engine off; for a long night out, idle it or run an auxiliary battery.
Read the water line and the ruts before you commit. IP68 means the lights don't care how deep it got.
Straight Talk
Underglow laws vary by state. Most states restrict red and blue light visible from the front or rear on public roads — those colors are reserved for emergency vehicles — and several restrict flashing or chasing patterns while you're moving. Off-road, on private land and while parked, run whatever you like. Check your state's vehicle code before you drive lit. We'd rather tell you here than have you hear it from a trooper.
Full 256 modes, any color, any pattern. This is what the kit is built for.
Stick to steady, non-emergency colors and skip the chase patterns. Check your local code.
Brake, turn and reverse sync wire into your factory circuits — these are the functions most likely to be regulated. Verify locally before wiring them in.
Compare
We're not comparing against the $60 stuff to look good — we're comparing against the premium kits too.
Swipe the table to compare →
| Feature | Typical $60 Kit | Premium $150–200 Kit | MagicCarpet |
|---|---|---|---|
| Fit & System | |||
| Light format | Pods — point sources | Pods — point sources | Continuous sections |
| Fitment | "Universal" one-size | "Universal" one-size | Kit per platform |
| Do you have to measure? | Yes | Yes | No — already done |
| Chaining between modules | Loose wires you splice | Proprietary plug | Sealed 15cm pigtails, both ends |
| Sealed end caps | — | — | ✓ Included |
| Expandable later | — | — | Sections sold separately |
| Light Output | |||
| LED layout | Single-row 5050 | Single-row 5050 | Dual-row 5050 |
| Beam angles | One | One | Two, working together |
| Visible diodes | Yes — dotted | Yes — dotted | No — diffused glow |
| Build & Protection | |||
| Housing wall | Plastic / none | ~1.0mm aluminum | 2.5mm aluminum |
| Potting | Surface skin | Surface skin | Full-depth solid |
| Ingress rating | IP65–IP67 | IP67 | IP68 |
| Housing rigidity | Flexible strip | Flexible / thin shell | Rigid 2.5mm channel |
| Mounting | Straps only | Straps / tape | Screws or straps — both included |
| Modules & Control | |||
| Module lengths | One fixed length | One fixed length | 11" / 17" / 27" |
| Music sync source | Phone mic | Phone mic | Built-in mic + phone |
| Dynamic modes | ~20 | ~100 | 256 + 10 presets |
| Brake / turn / reverse sync | — | Partial | ✓ All four |
| App + RF remote | App only | ✓ | ✓ |
Specifications
| Kit | Modules | Configuration | Total coverage |
|---|---|---|---|
| Off-Road Kit | 8 | 4 × 11" + 4 × 17" | 112" (284cm) |
| Mid-Size Kit | 8 | 4 × 11" + 2 × 17" + 2 × 27" | 131" (334cm) |
| Full-Size Kit | 8 | 2 × 11" + 2 × 17" + 4 × 27" | 163" (414cm) |
In the Box
Organize content into multiple columns to share useful information to your customers about your products, values...

Light Sections
Eight sections — four matched left/right pairs — in the exact lengths your platform's layout needs.

Control Box & Leads
6A control box with two 3m side leads and a 2m power lead, plus the RF remote.

End Caps & Mounting Kit
Two sealed end caps, self-tapping screws and heavy-duty straps for every module, and the install manual.
FAQ
Pick by platform. Off-Road Kit — Jeep Wrangler JL, JLU, Gladiator JT, and mid-size trucks whose underbodies are broken up by skid plates or exhaust routing. Mid-Size Kit — Tacoma, Ranger, Colorado, Bronco with flatter rockers. Full-Size Kit — F-150, Silverado, RAM, Tundra. Each ships with the exact section count and lengths that layout needs, so there's nothing to measure and nothing left over. Not sure how flat your rocker is? Look for a clear run of about 27" behind the front wheel — if you have it, take the Mid-Size Kit; if a skid plate or exhaust breaks it up, take the Off-Road Kit.
Traditionally, rock lights are pods mounted inside the wheel wells to light the ground and the rocks you're crawling over, while underglow is a strip under the body, mostly for looks. This kit does both jobs — and it's built as sections, not pods. Pods are point sources: each one throws a bright spot with a dark gap beside it, which is why an eight-pod kit still leaves most of your rocker in shadow. A 17" or 27" section lights that whole run evenly, so you get one continuous carpet instead of a dotted line. Same mounting points, same 12V feed, far more usable light on the ground.
Two options. Most vehicles fall into one of the three layouts even when the badge isn't listed — as a rule of thumb, a clear run of about 27" behind the front wheel means the Mid-Size Kit works, and if a skid plate or exhaust breaks that run up, the Off-Road Kit is the one. Or build it yourself: every length, the control box and the 2m extension leads are sold separately, so you can lay out a van, a buggy or a trailer exactly how you want. Light sections ship as matched L/R pairs, so ordering one covers both sides. Message us with your year, make and model if you'd rather we work it out for you.
Two. Every module SKU ships as a matched pair — one left-handed section and one right-handed section, with the pigtail leads exiting the correct way for each side of your rig. So ordering one 17" module gets you two 17" sections, enough to do both sides. That's why our part numbers end in "LR" — Left / Right. The control box and the extension leads are the exception: those are sold individually.
Yes — always. The control box (A500-UGL-CB-6A) is the brain of the system: it powers the modules, runs all 256 modes, and connects the app, remote and signal wires. The lights won't turn on without it. Every ready-made kit already includes one, so you're covered. If you're building your own layout from individual modules, add exactly one control box to your cart — a single 6A box drives an entire underbody, whether that's one section or ten.
It depends on your state. Red and blue light visible from the front or rear is restricted almost everywhere on public roads, and some states restrict flashing patterns while in motion. Parked, on private property and off-road, you're generally free to run any color or mode. Check your state's vehicle code — we can't give legal advice for where you live.
Only if you want to. Every kit ships with both self-tapping screws and heavy-duty straps. The housing is a rigid 2.5mm aluminum channel, so a screw through it gives you a permanent, rattle-free mount — that's the setup we'd run on a dedicated trail rig. Prefer not to put a hole in your frame? Strap them on instead; the channel is stiff enough that it won't sag or spin the way a flexible strip does. Plenty of people screw the long rocker runs and strap the corners.
That's what the 2.5mm aluminum channel and full-depth resin are for. The housing takes the strike and the solid potting means there's no hollow space for the impact to reach the board through. If a module does fail, you replace that one section — not the whole kit; all three lengths are sold separately.
No. You pick the mode once in the app or on the remote, then the control box's own microphone listens to the sound around it. You can also use your phone's mic if you'd rather. Either way, the lights react to actual sound, not to a preset pattern.
Yes — the kit powers up with the key at ACC, so the engine doesn't have to be turning. The system runs on 11–14V and is happiest at 12.5V, which is what your charging system delivers with the engine running. Parked with the engine off, a healthy battery starts around 12.6V and falls as you draw from it, so short stretches at camp are fine. A long night on battery alone will dim the output and eventually drop below the operating range — for extended use, idle the engine or run an auxiliary battery. Pull the key and the kit goes fully dead, so it never drains the battery overnight.
You replace that section, not the kit. Modules chain together with sealed connectors, so a damaged one unplugs and a new one drops in without disturbing the rest of the run — that's the advantage of a chained system over a single bonded strip. Replacement sections are sold on their own in all three lengths, so you buy the one you need — not another kit. If you're adding sections rather than replacing one, keep each side under 72W — a 6A box handles up to 9 × 11", 5 × 17" or 3 × 27" sections per side.
Each module has a 15cm lead at both ends. Leaving roughly 30cm (12") between modules lets those leads meet and route along the rail without being pulled tight or looped up where they can snag. It also spaces the light evenly instead of bunching it.
Three are required: green (+), blue (−) and brown (accessory). The brown lead is the kit's power gate — it ties into your accessory circuit so the lights come alive with the key and go fully dead when you pull it, and nothing turns on without it. The four signal wires — black (left turn), yellow (right turn), red (brake) and white (reverse) — are each optional. Leave one unconnected and that function simply won't trigger; the lights and all 256 modes still work.